SolVin 266SC - SOLIAO

About
Polyvinyl chloride made by suspension polymerisation. Solvin 266SC filler polymer is a suspension resin with very low porosity and small particle size. Used up to 50 phr in formulations for plastisols, it lowers viscosity and considrably reduces ageing of the paste during storage. APPLICATIONS Filler polymer for plastisols.&&

Product Description
Generic	PVC, not specified
Material Status	Commercial: Active
Features	Suspended polymer
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
K-Value	66.0		ISO 1628-2
Particle size distribution			ISO 1624
Mean diameter	30.0	µm	ISO 1624
Retained on 0.063 mm sieve	< 0.50	%	ISO 1624
Retained on 0.090 mm sieve	< 0.050	%	ISO 1624
Volatiles	< 0.30	%	ISO 1269

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.