Rulon® 488 - SOLIAO

About
Rulon® 488 is a dull turquoise material originally developed for use with painted surfaces. It has been used in veneer dryer bearings in the plywood industry. Its excellent wear resistance, especially in extremely dry environments, make it a material of choice in hydrogen and natural gas compressors. Its almost universal chemical resistance enables it to withstand corrosives and acids sometimes present in trace amounts in these environments. It has a higher load capacity than Rulon® J and better abrasion resistance than both Rulon® J and Rulon® 123.&&

About

Rulon® 488 is a dull turquoise material originally developed for use with painted surfaces. It has been used in veneer dryer bearings in the plywood industry. Its excellent wear resistance, especially in extremely dry environments, make it a material of choice in hydrogen and natural gas compressors. Its almost universal chemical resistance enables it to withstand corrosives and acids sometimes present in trace amounts in these environments. It has a higher load capacity than Rulon® J and better abrasion resistance than both Rulon® J and Rulon® 123.&&

Product Description
Supplier	Saint Gobain
Generic	PTFE
Material Status	Commercial: Active
Features	Good wear resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.25	g/cm³	ASTM D792
Water absorption rate
24hr	0.00	%	ASTM D570
saturated	0.00	%	ASTM D570

MECHANICAL	Nominal value	Unit	Test method
tensile strength
23℃	13.8	MPa	ASTM D638
Tensile strain
Fracture, 23 ℃	175	%	ASTM D638
compressive strength	6.89	MPa	ASTM D882
Limiting pressure and speed	0.350	MPa-m/s

THERMAL	Nominal value	Unit	Test method
Linear coefficient of thermal expansion	1.26E-4	cm/cm/℃
Linear coefficient of thermal expansion	9.36E-5	cm/cm/℃
Linear coefficient of thermal expansion	1.26E-4	cm/cm/℃
Linear coefficient of thermal expansion	9.9E-5	cm/cm/℃
Thermal conductivity coefficient	0.375	W/m/K	JIS R2618
Linear coefficient of thermal expansion
Maximum operating temperature	288	℃
Minimum service temperature	-240	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.