Enviramid® N2320MHL BK

About
Nylon 6, 20% Mineral Filled&&

Product Description
GenericPA6
Material StatusCommercial: Negative
AvailabilitysNorth America

Technical Data
PHYSICALNominal valueUnitTest method
Density1.30g/cm³ISO 1183
Shrinkage rate
MD:3.2 mm0.60 to 0.90%ISO 294-4
Water absorption rate
23℃,24hr1.3%ISO 62

MECHANICALNominal valueUnitTest method
tensile strength
fracture60.0MPaISO 527-2
Tensile strain
fracture3.0%ISO 527-2
Bending modulus3600MPaISO 178
bending strength105MPaISO 178

IMPACTNominal valueUnitTest method
Charpy Notched Impact Strength4.0kJ/m²ISO 179
Impact strength of cantilever beam notch4.0kJ/m²ISO 180

THERMALNominal valueUnitTest method
Hot deformation temperature
1.8 MPa, unannealed165ISO 75-2/A

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.