Optiflex 70A TPU

About
Optiflex 70A TPU is a Thermoplastic Polyurethane Elastomer material. It is available in North America for injection molding. Primary attribute of Optiflex 70A TPU: Excellent Processability.&&

Product Description
Generic	TPU
Material Status	Commercial: Active
Features	Excellent Processability
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.08	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	70		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
fracture	26.0	MPa	ASTM D412
100% strain	3.00	MPa
300% strain	6.00	MPa
Tensile strain
fracture	880	%	ASTM D412
tear strength	73.6	kN/m	ASTM D624
Compression deformation
24℃，22 hr	20	%
70℃，22 hr	35	%

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	75.0	℃	ASTM D1525

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	79 to 91	°C
Drying time	2.0 to 4.0	hr
Recommended maximum moisture content	0.030	%
Processing (melt) temperature	190 to 200	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.