| About |
|---|
| CP53-30 is a high density polyethylene copolymer developed for corrugated piping applications. This product is recommended for use in applications that are required to meet AASHTO specifications: M 294/MP 7. CP53-30 is a listed PPI Third Party Certified resin.&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | HDPE copolymer |
| Material Status | Commercial: Active |
| Features | Copolymer,High density |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.953 | g/cm³ | ASTM D4883 |
| Melt Flow Rate | ASTM D1238 | ||
| 190℃，2.16kg | 0.35 | g/10min | ASTM D1238 |
| 190℃，21.6kg | 25 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| — | > 1000 | hr | ASTM D5397 |
| 100% non-ionic detergent, F50 | > 1000 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 65 | ASTM D2240 | |
| tensile strength | |||
| fracture | 33.8 | MPa | ASTM D638 |
| yield | 25.5 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 600 | % | ASTM D638 |
| yield | 9.0 | % | ASTM D638 |
| Bending modulus | |||
| 2% secant | 979 | MPa | ASTM D790-A |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 460 | J/m | ASTM D256 |
| Area | 45.3 | kJ/m² | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 23.4 | ℃ | ASTM D648 |
| Embrittlement temperature | < -118 | ℃ | ASTM D746 |
| Vicat Softening Temp | 125 | ℃ | ASTM D1525 |
| Oxygen sensing time | |||
| 210℃ | > 58 | min | ASTM D3895 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Cell Classification | 435560A | ASTM D3350 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. NCTL (Single Point) |
| 3. 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |