LITEN MB 77 - SOLIAO

About
LITEN MB 77 is a linear polyethylene, copolymer with narrow molecular weight distribution and high melt flow, intended for injection moulding. It combines good rigidity and impact strength with easy processability and excellent melt flow. This grade is suitable for manufacture of various types of pails, pots, household products, etc. LITEN MB 77 meets the hygienic requirements on materials and articles intended for contact with foodstuffs according to Regulation (EC) 1935/2004 of the European Parliament and of the Council, as well as according to Commission Regulation (EU) No 10/2011 including changes and additions.&&

About

LITEN MB 77 is a linear polyethylene, copolymer with narrow molecular weight distribution and high melt flow, intended for injection moulding. It combines good rigidity and impact strength with easy processability and excellent melt flow. This grade is suitable for manufacture of various types of pails, pots, household products, etc. LITEN MB 77 meets the hygienic requirements on materials and articles intended for contact with foodstuffs according to Regulation (EC) 1935/2004 of the European Parliament and of the Council, as well as according to Commission Regulation (EU) No 10/2011 including changes and additions.&&

Product Description
Generic	PE copolymerization
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,High liquidity,Food contact compliance,Weight distribution,Copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，2.16kg	16	g/10min
190℃，5.0kg	38	g/10min

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	3.5	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	125	℃	ISO 306

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	57		ISO 868
tensile strength
yield	24.0	MPa	ISO 527-2
Tensile strain
yield	9.0	%	ISO 527-2
Bending modulus	1000	MPa	ISO 178

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.