| About |
|---|
| Eltex® TUB 172 is a medium-density polyethylene copolymer designed for the extrusion of pressure pipe for gas applications. It is classified PE 80 in accordance with ISO 12162 based on ISO 9080 analysis. Characteristics: PE 80 Yellow pipe compound Application: Gas&& |
| Product Description | |
|---|---|
| Supplier | INEOS |
| Generic | MDPE |
| Material Status | Commercial: Active |
| Features | Copolymer |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.939 | g/cm³ | ISO 1183/A |
| Melt Flow Rate | |||
| 190℃，5.0kg | 0.85 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 750 | MPa | ISO 527-1-2 |
| tensile strength | |||
| Yield, 23 ℃ | 19.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| Fracture, 23 ℃ | > 350 | % | ISO 527-2/50 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 121 | ℃ | ISO 306/A |
| thermal stability | |||
| OIT，210℃ | > 20 | min | ISO 11357-6 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Pigment dispersion | < 3.00 | ISO 18553 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Grade |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |