| About |
|---|
| Sylvin 8409-80 Natural Is A Flexible Thermoplastic Alloy Compound Of Vinyl And Polyurethane. It Can Be Used In Extrusion Or Molding Applications That Require Increased Abrasion And Chemical Resistance&& |
| Product Description | |
|---|---|
| Supplier | Sylvin |
| Generic | PVC+PUR |
| Material Status | Commercial: Active |
| Features | Good wear resistance,Solvent resistance |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.34 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 80 | ASTM D2240 | |
| Shore A, 10 seconds | 80 | ASTM D2240 | |
| tensile strength | |||
| fracture | 16.5 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 380 | % | ASTM D638 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 64.8 | kN/m | ASTM D624 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 166 to 177 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |