| About |
|---|
| Black masterbatch with an LLDPE carrier resin, suitable for use with polyethylene and polypropylene resins for injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Machinable,Good color stability |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.2 | g/cm³ | ASTM D792 |
| Ash Content | 40 | % | ASTM D5630 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |