| About |
|---|
| Alathon H5057 is a multi-purpose high-flow resin that exhibits enhanced low temperature impact performance, enhanced processing and thermal stability for fast cycling in multi-cavity stack molds, good color and organoleptic properties. Typical applications are rigid food containers such as cultured dairy product containers, margarine tubs, butter tubs, small frozen food containers and promotional drink cups.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High liquidity,Quick molding cycle,Good sensory characteristics.,low-temperature impact resistance,Heat Stabilized,Good coloring |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.948 | g/cm³ | ASTM D1505 |
| Apparent density | 0.59 to 0.63 | g/cm³ | ASTM D1895 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 57 | g/10min | ASTM D1238 |
| Spiral flow length | 53.8 | cm | Internal Method |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 21 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | |||
| -18℃ | 330 | J/m | ASTM D4812 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 64.0 | ℃ | ASTM D648 |
| Vicat Softening Temp | 118 | ℃ | ASTM D1525 |
| Melting peak temperature | 126 | ℃ | ASTM D3418 |
| Crystallization peak temperature | |||
| DSC | 113 | ℃ | ASTM D3418 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 69 | ASTM D2240 | |
| Tensile modulus | |||
| — | 795 | MPa | |
| 1% secant | 683 | MPa | |
| tensile strength | |||
| Fracture, 23 ℃ | 19.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 4.1 | % | ASTM D638 |
| Bending modulus | |||
| — | 1050 | MPa | |
| 1% secant | 972 | MPa | |
| 2% secant | 820 | MPa |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |