MAJORIS CN060 - 8229

About
CN 060 – 8229 is a very high impact polypropylene heterophasic copolymer (block copolymer) intended for injection moulding. The product is available in black (CN 060 – 8229) but other colours can be supplied on request. CN 060 – 8229 good process ability and demoulding properties. An excellent choice for household and packaging articles APPLICATIONS CN 060 – 8229 has been developed especially for demanding applications in automotive industry and transport packaging and house ware.&&

About

CN 060 – 8229 is a very high impact polypropylene heterophasic copolymer (block copolymer) intended for injection moulding. The product is available in black (CN 060 – 8229) but other colours can be supplied on request. CN 060 – 8229 good process ability and demoulding properties. An excellent choice for household and packaging articles APPLICATIONS CN 060 – 8229 has been developed especially for demanding applications in automotive industry and transport packaging and house ware.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,High impact resistance,Renewable resources,Good stripping performance,Food contact compliance,Block Copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.904	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	4.0	g/10min	ISO 1133
Shrinkage rate	1.0 to 2.0	%

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	7.0	kJ/m²
23℃	18	kJ/m²
Multi axial instrumented impact energy			ISO 6603-2
-20 ℃, total impact penetration energy	46.0	J
0 ℃, total impact penetration energy	47.0	J

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	90.0	℃	ISO 75-2/B

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	81		ISO 2039-2
Tensile modulus	1250	MPa	ISO 527-1-2
tensile strength
yield	22.0	MPa	ISO 527-2/50
Tensile strain
yield	5.0	%	ISO 527-2/50

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	230 to 260	°C
Mold temperature	10.0 to 30.0	°C
Injection speed	快速
Hold pressure	20.0 to 50.0	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.