| About |
|---|
| HI-ZEX™ 550P是一种高密度聚乙烯产品,。 它可以通过挤出或管路挤出成型进行加工,在亚太地区、北美洲或欧洲有供货。 典型应用领域为:水管/管道/饮用水。 主要特性为:高抗环境应力断裂能力 (escr)。&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | High ESCR |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.946 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.23 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| Compression Molding | > 1000 | hr | ASTM D1693 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | |||
| Compression Molding | 20 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 122 | ℃ | ISO 306 |
| Melting temperature | |||
| DSC | 131 | ℃ | ISO 3146 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, molded | 65 | ISO 868 | |
| Tensile modulus | |||
| Rotational Molding | 950 | MPa | ISO 527-2 |
| tensile strength | |||
| Yield, molding | 23.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, molded | 300 | % | ISO 527-2 |
| Bending modulus | |||
| Compression Molding | 1100 | MPa | ISO 178 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |