About |
---|
The product is no rules structure and thermoplastic elastomer, almost completely no crystallization, has low temperature and plasticizing Mooney viscosity. Processing liquidity is very good, has very good heat resistance, weather resistance, anti-bending, excellent fire resistance,it can be used as halogen rubber alone, and also can be arbitrary proportion mixed and used with CR?CSM ?NBR?SBR?NR and so on. CPE135B widely used in manufacturing the sheath of electric wires and cables, rubber pipe, flame retardant conveyor belt, rubber, packing strip, wire and cables , roof waterproofing materials, and etc.&& |
Product Description | |
---|---|
Supplier | Weihai Hisea Plastic Rubber Co., LTD. |
Generic | CPE |
Material Status | Commercial: Active |
Features | Weather resistance is good,High liquidity,Flame Characteristics,Heat Resistance, Good |
Availabilitys | Asia Pacific |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Mooney viscosity | 45 to 55 | MU | ASTM D1646 |
Chlorine content | 34.0 to 36.0 | wt% | |
Volatiles | < 0.50 | % |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Fusion heat | < 2.00 | J/g |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
decomposition temperature | > 165 | ℃ |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | < 56 | ||
tensile strength | > 8.50 | MPa | |
Tensile strain | |||
fracture | > 700 | % |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |