| About |
|---|
| ACLAR® 22C (10 mil) is a Polychlorotrifluoroethylene (PCTFE) product. It can be processed by cast film and is available in Asia Pacific, Europe, or North America. Primary characteristic: copolymer.&& |
| Product Description | |
|---|---|
| Supplier | Honeywell |
| Generic | PCTFE |
| Material Status | Commercial: Active |
| Features | Copolymer,Block resin |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.08 | g/cm³ | ASTM D1505 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | ASTM D882 | ||
| MD：250 µm | 1040 | MPa | |
| TD：250 µm | 1040 | MPa | |
| tensile strength | ASTM D882 | ||
| MD, yield, 250 µ m | 36.0 | MPa | |
| TD, yield, 250 µ m | 33.0 | MPa | |
| Tensile strain | ASTM D882 | ||
| MD, yield, 250 µ m | 240 | % | |
| TD, yield, 250 µ m | 240 | % | |
| Water vapor permeability | 0.047 | g/m²/24 hr | ASTM E96 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermal conductivity coefficient | 0.22 | W/m/K | ASTM C177 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | |||
| 0.254 mm | 100 | % | ASTM D2863 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | |||
| 254 µm | 1.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |