ACRYLITE® Hi-Gloss NTA-1

About
ACRYLITE® Hi-Gloss NTA-1 polymer is an opaque, amorphous, and impact-modified thermoplastic molding and extrusion compound based on polymethyl methacrylate. Typical properties of ACRYLITE® Hi-Gloss acrylic polymers are: excellent weather resistance improved resistance to stress cracking good melt flow rate good polishability impact resistance The special properties of ACRYLITE® Hi-Gloss NTA-1 polymer are: good heat resistance available in a range of opaque colors high melt strength increased impact/break resistance and strength Application: Used for injection molding technical parts.&&

About

ACRYLITE® Hi-Gloss NTA-1 polymer is an opaque, amorphous, and impact-modified thermoplastic molding and extrusion compound based on polymethyl methacrylate. Typical properties of ACRYLITE® Hi-Gloss acrylic polymers are: excellent weather resistance improved resistance to stress cracking good melt flow rate good polishability impact resistance The special properties of ACRYLITE® Hi-Gloss NTA-1 polymer are: good heat resistance available in a range of opaque colors high melt strength increased impact/break resistance and strength Application: Used for injection molding technical parts.&&

Product Description
Supplier	ROHM
Generic	PMMA
Material Status	Commercial: Active
Features	Good Rigidity,Weather resistance is good,High impact resistance,Good liquidity,Good melt strength,Heat Resistance, Good,Amorphous
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.18	g/cm³	ISO 1183
Melt Volume Rate
230℃，3.8 kg	3.00	cm³/10min	ISO 1133
Water absorption rate
Equilibrium, 23 ℃, 50% RH	< 3.0	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2700	MPa	ISO 527-1-2
tensile strength
yield	68.0	MPa	ISO 527-2/50
Tensile strain
yield	5.0	%	ISO 527-2/50
Nominal tensile fracture strain	10	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	33	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	102	℃	ISO 75-2/A
0.45 MPa, unannealed	103	℃	ISO 75-2/B
Glass transition temperature	120	℃	IEC 1006
Vicat Softening Temp
B50	110	℃	ISO 306

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Igniting temperature of the hot wire	675	℃	IEC 60695-2-13
Flame retardant level	B2		DIN 4102

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.