| About |
|---|
| UBE Nylon PAE1200U is a Polyamide 12 Elastomer (Nylon 12 Elast) material. It is available in North America. Primary attribute of UBE Nylon PAE1200U: Clarity. Typical applications include: Consumer Goods Engineering/Industrial Parts Handles Hose/Tubing Medical/Healthcare&& |
| Product Description | |
|---|---|
| Supplier | UBE |
| Generic | PA12弹性体 |
| Material Status | Commercial: Active |
| Features | Good Clarity,Low density |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.00 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 235℃，2.16kg | 14 | g/10min | ASTM D1238 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 无断裂 | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 82.0 | ℃ | ASTM D648 |
| Melting temperature | 154 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 58 | ASTM D2240 | |
| tensile strength | |||
| Yield, 23 ℃ | 9.00 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 300 | % | ASTM D638 |
| Bending modulus | |||
| 23℃ | 150 | MPa | ASTM D790 |
| bending strength | |||
| 23℃ | 7.00 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |