Promyde® B20 P

About
Promyde® B20 P is a Polyamide 6 heat stabilised, nucleated and lubricated. CHARACTERISTICS Promyde B20 P is a polyamide 6 heat stabilized, lubricated and nucleated for fast cycle and technical injection moulding. Its main characteristics are easy flowing, easy mould filling and very fast cooling time whilst maintaining excellent polyamide 6 mechanical properties. APPLICATIONS Due to its easy flow characteristics and very fast cooling time; Promyde B20 P provides significant productivity improvement. Promyde B20 P mould filling is 35 % faster than standard viscosity polyamide 6; that combined with its excellent mechanical and thermal properties make it suitable for high speed multi cavity injection moulding for parts such as components used in automotive, electrical, electronics, curtain systems, and also for large technical parts produced in single cavity moulds.&&

About

Promyde® B20 P is a Polyamide 6 heat stabilised, nucleated and lubricated. CHARACTERISTICS Promyde B20 P is a polyamide 6 heat stabilized, lubricated and nucleated for fast cycle and technical injection moulding. Its main characteristics are easy flowing, easy mould filling and very fast cooling time whilst maintaining excellent polyamide 6 mechanical properties. APPLICATIONS Due to its easy flow characteristics and very fast cooling time; Promyde B20 P provides significant productivity improvement. Promyde B20 P mould filling is 35 % faster than standard viscosity polyamide 6; that combined with its excellent mechanical and thermal properties make it suitable for high speed multi cavity injection moulding for parts such as components used in automotive, electrical, electronics, curtain systems, and also for large technical parts produced in single cavity moulds.&&

Product Description
Generic	PA6
Material Status	Commercial: Active
Features	Excellent Processability,Good liquidity,Nucleation,Quick molding cycle,Good stripping performance,Lubricating,Heat Stabilized
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	< 80	°C
Drying time	4.0 to 6.0	hr
Processing (melt) temperature	250 to 270	°C
Mold temperature	40 to 80	°C
Injection speed	中等偏快

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.079 in/min
3. 10°C/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.