SARANEX™ 451

About
SARANEX™ 451 Clear Coextruded Barrier Film is a multi-layer film designed for use in packaging, converting and industrial liner applications. General Characteristics: Excellent barrier to oxygen, water vapor, flavors and aromas Good clarity Heat sealable Complies with U.S. FDA requirements for food contact applications Complies with EU, No 10/2011 Contact your Dow representative for more information on food contact compliance Available Widths: 18 to 44 inches or 54 to 88 inches (460 to 1115 mm or 1370 to 2235 mm) Available Core Sizes: 3 or 6 inch cores Treatment: One side corona treatment available&&

About

SARANEX™ 451 Clear Coextruded Barrier Film is a multi-layer film designed for use in packaging, converting and industrial liner applications. General Characteristics: Excellent barrier to oxygen, water vapor, flavors and aromas Good clarity Heat sealable Complies with U.S. FDA requirements for food contact applications Complies with EU, No 10/2011 Contact your Dow representative for more information on food contact compliance Available Widths: 18 to 44 inches or 54 to 88 inches (460 to 1115 mm or 1370 to 2235 mm) Available Core Sizes: 3 or 6 inch cores Treatment: One side corona treatment available&&

Product Description
Supplier	DOW
Generic	PVDC
Material Status	Commercial: Active
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
friction coefficient
With oneself – dynamic	0.20		Internal Method

film	Nominal value	Unit	Test method
film thickness
test	38	µm
film thickness	1.5 mil (38.1 µ
tensile strength			ASTM D882
MD, fracture, 38 µ m	26.2	MPa	ASTM D882
TD, fracture, 38 µ m	19.3	MPa	ASTM D882
Tensile strain			ASTM D882
MD, fracture, 38 µ m	400	%	ASTM D882
TD, fracture, 38 µ m	440	%	ASTM D882
Oxygen transfer rate
23℃，50% RH，38 µm	7.8	cm³/m²/24 hr	ASTM D3985
Water vapor transmittance
38℃，90% RH，38 µm	5.1	g/m²/24 hr	ASTM F1249
Heat sealing strength			ASTM F88
177℃，38.1 µm	420	N/m	ASTM F88
MD, 30 psi, 1.0 second: 177 ℃, 38.1 µ m	560	N/m	ASTM F88
dosage
38.1 µm	25.7	m²/kg	ASTM D4321

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.