| About |
|---|
| Product Details: Ultra high performance thermoplastic polymer, PBI Poly (2, 5 benzimidazole) blended with Polyether Ketone, semi-crystalline fine powder suitable for compression molding as well as extrusion, with easy flow, dark brown in color. Application Areas: Suitable for high temperature applications under extreme load, Excellent wear resistance, suitable for semiconductor applications and plasma handling equipments.&& |
| Product Description | |
|---|---|
| Generic | PBI |
| Material Status | Commercial: Active |
| Features | Good liquidity,High Heat Resistance,Hypocrystalline,Good wear resistance,V-0 |
| Availabilitys | Africa & Middle East ,North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Continuous use temperature | 300 | ℃ | UL 746B |
| Glass transition temperature | 152 | ℃ | ASTM D3418 |
| Melting temperature | 372 | ℃ | ASTM D3418 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 0.80 mm | V-0 | UL 94 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Apparent density | 0.20 | g/cm³ | ASTM D1895B |
| Particle size distribution | |||
| D（.99） | < 100.0 | µm | |
| D（50） | < 10.0 | µm | |
| Apparent viscosity of melt | |||
| 400℃，1000 sec^-1 | 300 to 350 | Pa·s | ASTM D3835 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |