| About |
|---|
| Solanyl ® C8102 is an end compound suitable for film applications and is specially developed for packaging. Solanyl ® C8102 can be processed on conventional blown or cast film extrusion lines suitable for (multi-layer) flexible films. Solanyl ® C8102 is a competitive alternative for currently used biodegradable plastics and LDPE for a wide range of applications. Solanyl ® C8102 has a natural feel and look. Solanyl ® C8102 is biodegradable and has a biobased or plant derived material content of > 30%. Applications in which Solanyl ® C8102 can be used are: Packaging & Consumer goods Agriculture products&& |
| Product Description | |
|---|---|
| Generic | 生物可降解聚合物 |
| Material Status | Commercial: Active |
| Features | Good flexibility,Renewable resources,Biodegradable,Food contact compliance,Compostable |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| film | Nominal value | Unit | Test method |
| film thickness | |||
| test | 30 to 400 | µm | |
| Tensile strain | |||
| MD, yield | 15 to 30 | % | |
| TD, yield | 10 to 30 | % | |
| MD, fracture | 100 to 150 | % | |
| TD, fracture | 80 to 120 | % | |
| Elmandorf tear strength | |||
| MD | 20 to 100 | N | ISO 6383-2 |
| MD | 55 to 60 | N | |
| TD | 25 to 110 | N | ISO 6383-2 |
| TD | 50 to 55 | N | |
| Water vapor transmittance | |||
| 23℃，75% RH | 130 | g/m²/24 hr | |
| 23℃，85% RH | 180 | g/m²/24 hr | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| injection molding | > 20 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| injection molding | > 50 | kJ/m² | ISO 179/1eU |
| Impact strength of cantilever beam notch | |||
| Injection molding | 11 to 21 | kJ/m² | ISO 180-1A |
| Notched impact strength of cantilever beam | |||
| Injection molding | 10 to 20 | kJ/m² | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 50.0 | ℃ | ISO 75-2/B |
| Glass transition temperature | 50.0 to 55.0 | ℃ | DSC |
| Vicat Softening Temp | 50.0 | ℃ | ISO 306/A |
| Melting temperature | |||
| DSC | 110 to 130 | ℃ | Internal Method |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Water Activity | < 0.300 | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, injection molding | 35 | ISO 868 | |
| Tensile modulus | |||
| injection molding | 40.0 to 100 | MPa | |
| Cutting, injection molding | 20.0 to 50.0 | MPa | |
| tensile strength | |||
| Yield, injection molding | 5.00 to 6.00 | MPa | |
| Fracture, injection molding | 9.00 | MPa | |
| Bending modulus | |||
| injection molding | 400 | MPa | ISO 178 |
| bending strength | |||
| injection molding | 2.40 | MPa | ISO 178 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.25 to 1.30 | g/cm³ | ISO 1183 |
| Apparent density | 0.70 to 0.80 | g/cm³ | ISO 60 |
| Melt Flow Rate | |||
| 170℃，2.16kg | 2.5 to 5.5 | g/10min | |
| Melt Volume Rate | |||
| 190℃，2.16 kg | 5.00 to 7.00 | cm³/10min | ISO 1133 |
| Shrinkage rate | < 4.0 | % | ISO 294-4 |
| water content | < 1.1 | Internal Method | |
| Ash Content | 1.0 to 2.0 | % | Internal Method |
| Apparent viscosity of melt | |||
| 140℃，10.0 sec^-1 | 4300 | Pa·s | |
| 140℃，100 sec^-1 | 1700 | Pa·s | |
| 140℃，1000 sec^-1 | 500 | Pa·s | |
| 160℃，10.0 sec^-1 | 2500 | Pa·s | |
| 160℃，100 sec^-1 | 1100 | Pa·s | |
| 160℃，1000 sec^-1 | 320 | Pa·s | |
| 170℃，10.0 sec^-1 | 2400 | Pa·s | |
| 170℃，100 sec^-1 | 900 | Pa·s | |
| 170℃，1000 sec^-1 | 245 | Pa·s |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. DIN 53514 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |