| About |
|---|
| SINPOLENE MBB 1232 is a highly pigmented and high jetness universal black masterbatch specifically designed for injection moulding and extrusion of polypropylene, polystyrene, ABS and SAN. SINPOLENE MBB 1232 is delivered as free-flowing pellets for processing convenience. It is packed in 25 kg bags. The product should be stored in dry place. SINPOLENE MBB 1232 has uniform dispersion and offers high colouring value and UV light protection.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Renewable resources |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，10.0kg | < 15 | g/10min | ASTM D1238 |
| Carbon black content | 45 | % | ASTM D1603 |
| water content | < 0.25 | % | ASTM D3030 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |