| About |
|---|
| EVA resin ALCUDIA® PA-430 is recommended for injection moulding as well as for blends with other products like waxes and mineral fillers. It contains antioxidant and free flowing agent. TYPICAL APPLICATIONS Injection moulding. Release agents containing silicone must be avoided Blends with waxes Manufacture of masterbatches Microcellular foams Extrusion of profiles and sheets with high flexibility Recommended melt temperature below 200°C to avoid the decomposition of the polymer. Processing conditions should be optimised for each production line.&& |
| Product Description | |
|---|---|
| Supplier | REPSOL |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Good flexibility,Food contact compliance,Inoxidizability |
| Availabilitys | North America,Europe |
| Process Methods | Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Melting temperature | 77.0 | ℃ | |
| Ring and Ball Softening Point | 162 | ℃ | ASTM E28 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 79 | ||
| Shaw’s D | 29 | ||
| tensile strength | |||
| fracture | 25.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 740 | % | ISO 527-2 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 0.944 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.0 | g/10min | ISO 1133 |
| Vinyl acetate content | 24.0 | wt% | |
| Brookfield viscosity | |||
| 180℃ | 3728000 | mPa·s | |
| 200℃ | 6696000 | mPa·s |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | < 200 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Spindle SC4-27 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |