SABIC® HDPE P6006 10000

About
SABIC® HDPE P6006 10000 is black compounded high density polyethylene with a bimodal distribution of molecular mass. Due to its profile of properties, this material is typically used for gas and drinking water pipe. Other typical applications include irrigation and waste water pipes. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.&&

About

SABIC® HDPE P6006 10000 is black compounded high density polyethylene with a bimodal distribution of molecular mass. Due to its profile of properties, this material is typically used for gas and drinking water pipe. Other typical applications include irrigation and waste water pipes. MRS class ISO 12162 MPa = 10.0 (PE 100). This product is not intended for and must not be used in any pharmaceutical/medical applications.&&

Product Description
Supplier	SABIC
Generic	HDPE
Material Status	Commercial: Active
Features	High density,Bimodal molecular weight distribution
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.959	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，21.6kg	6.2	g/10min
190℃，5.0kg	0.23	g/10min
Carbon black content	2.3	%	ISO 6964

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179
-30℃	13	kJ/m²
23℃	26	kJ/m²

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	74.0	℃	ISO 306
Oxygen sensing time
210℃	> 20	min	EN 728

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	63		ISO 868
Tensile modulus
2 mm, molded into shape	900	MPa	ISO 527-2/1BA/50
tensile strength
Yield, 2 mm, molded	23.0	MPa	ISO 527-2/1BA/50
Tensile strain
Yield, 2 mm, molded	9.0	%	ISO 527-2/1BA/50

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	190 to 220	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.