PLEXIGLAS® Sheet Optical HC

About
PLEXIGLAS® Optical hard coated (HC) is an extruded acrylic sheet material. The surface coating offers excellent resistance to abrasion and chemicals. The material also shows outstanding optical properties. The sheet is coated on one side and is particularly recommended for demanding applications exposed to heavy wear and frequent cleaning. PLEXIGLAS® Optical hard coated also provides optimal protection in high-traffic areas. The coating preserves the material’s surface appearance. Applications: Aviation (dust covers for windows) Conservation glazing and show cases Electronic displays Furniture and shop fitting Industrial glazing Picture framing Signage&&

About

PLEXIGLAS® Optical hard coated (HC) is an extruded acrylic sheet material. The surface coating offers excellent resistance to abrasion and chemicals. The material also shows outstanding optical properties. The sheet is coated on one side and is particularly recommended for demanding applications exposed to heavy wear and frequent cleaning. PLEXIGLAS® Optical hard coated also provides optimal protection in high-traffic areas. The coating preserves the material’s surface appearance. Applications: Aviation (dust covers for windows) Conservation glazing and show cases Electronic displays Furniture and shop fitting Industrial glazing Picture framing Signage&&

Product Description
Supplier	ROHM
Generic	PMMA
Material Status	Commercial: Active
Features	Weather resistance is good,Good surface appearance,Good Hardness,Good wear resistance,Solvent resistance
Availabilitys	Europe
Process Methods	Extrusion

Technical Data
IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	10	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	106	℃	ISO 306/B

FLAME CHARACTERISTICS	Nominal value	Test method
Flame Resistance
—	B2	DIN 4102
—	E	EN 13501-1
toxicity	Meets Requirements	Internal Method
Smoke density	Meets Requirements	FAR 25.853

optical performance	Nominal value	Unit	Test method
Transmittance	92.0	%	DIN 5036
Yellowness index	< 0.50	YI	ASTM D1925
Falling Sand Test	2.30	cd/lx/m²	DIN 52348

Supplementary information	Nominal value	Unit	Test method
Adhesive strength	GT 0		ISO 2409

MECHANICAL	Nominal value	Unit	Test method
Pencil hardness			EN 13523-4
Tensile modulus	3450	MPa	ISO 527-2
tensile strength	67.5	MPa	ISO 527-2
Wear resistance -100 cycles, 5, 4 N, CS-10F	< 35H	% Haze	ISO 9352

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.