| About |
|---|
| Product characteristics Protection of electronic devices from electrostatic phenomena Vacuum formable Conductive & dissipative Product applications Automotive industry Electronic industry Packaging&& |
| Product Description | |
|---|---|
| Generic | ABS+TPU |
| Material Status | Commercial: Active |
| Features | Conductive |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Equilibrium, 23 ℃, 50% RH | 0.30 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 20 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 102 | ℃ | ISO 306/B |
| Linear coefficient of thermal expansion | |||
| MD | 9.0E-5 | 1/℃ | DIN 53752 |
| Thermal conductivity coefficient | 0.17 | W/m/K | DIN 52612 |
| Operating temperature | |||
| long-term | 85 | ℃ | |
| short-term | < 100 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+4 to 1.0E+6 | ohms | DIN EN 61340 |
| Volume resistivity | > 1.0E+12 | ohms·cm | DIN EN 61340 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 80 | ISO 2039-2 | |
| Tensile modulus | 2130 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 32.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 35 | % | ISO 527-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. ABS |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |