| About |
|---|
| This data sheet describes TEKNIFLEX™ Pouch CL6014 aka F93TT-2 product This pouch product is made with Low Density Polyethylene (LDPE) heat seal (HS) layer for food, pharmaceutical, and cosmetic packaging structures requiring oxygen and moisture barrier protection. It is available with custom and standard printing on the paper surface&& |
| Product Description | |
|---|---|
| Generic | 单面涂层纸+LDPE+铝箔+LDPE |
| Material Status | Commercial: Active |
| Features | Low odor,Food contact compliance,Moisture resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| film | Nominal value | Unit | Test method |
| film thickness | 120 | µm | |
| Sealing emphasis | 0.61 | N/mm | |
| Oxygen transfer rate | |||
| 23℃，100% RH | < 3.2E-3 | cm³/m²/24 hr | ASTM D3985 |
| Water vapor transmittance | |||
| 38℃，90% RH | < 3.2E-3 | g/m²/24 hr | ASTM F1249 |
| dosage | 7.00 | m²/kg | ASTM D646 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Base Weight | 87.8 | g/m² | ASTM D646 |
| Roll Width | > 2.50 | cm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Self-Seal @ 350°F, 40psi, 0.5 sec |
| 3. Roll width tolerance: ±1.6 mm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |