| About |
|---|
| Multiuse Leostomer® LJ-3180N is a Thermoplastic Polyurethane Elastomer product. It can be processed by injection molding and is available in Asia Pacific or North America. Characteristics include: Eco-Friendly/Green Weather Resistant&& |
| Product Description | |
|---|---|
| Generic | TPU |
| Material Status | Commercial: Negative |
| Features | Weather resistance is good,Renewable resources |
| Availabilitys | North America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.948 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 3.3 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 80 | ISO 868 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 18.5 | MPa | ISO 37 |
| 100% strain | 3.60 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 910 | % | ISO 37 |
| tear strength | 55 | kN/m | ISO 34-1 |
| Compression deformation | ISO 815 | ||
| — | 53 | % | ISO 815 |
| 70℃，22 hr | 47 | % | ISO 815 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength | |||
| 50 ℃, 24 hours, in IRM 902 oil | -13 | % | ISO 1817 |
| Changes in tensile stress during fracture | |||
| 50 ℃, 24 hours, in IRM 902 oil | 10 | % | ISO 1817 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -60.0 | ℃ | ISO 974 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 180 | °C | |
| Barrel middle temperature | 190 | °C | |
| Barrel front temperature | 200 | °C | |
| Nozzle temperature | 200 | °C | |
| Processing (melt) temperature | 180 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |