Hanwha Total PP BI850

About
Description BI850, Hanwha Total HIPP, is high flow impact copolymer for injection molding application. It exhibits a high rigidity as well as an excellent impact strength due to the ideal combination of highly crystalline homo matrix and the well-designed rubber morphology. This is suitable for the injection molding of large articles which require high melt flowability. Characteristics High stiffness & flowability Excellent balance between stiffness & impact strength Applications Large E&E articles, base resin for PP compound (auto & E&E) Thin wall injection molding (TWIM) containers, housewares&&

About

Description BI850, Hanwha Total HIPP, is high flow impact copolymer for injection molding application. It exhibits a high rigidity as well as an excellent impact strength due to the ideal combination of highly crystalline homo matrix and the well-designed rubber morphology. This is suitable for the injection molding of large articles which require high melt flowability. Characteristics High stiffness & flowability Excellent balance between stiffness & impact strength Applications Large E&E articles, base resin for PP compound (auto & E&E) Thin wall injection molding (TWIM) containers, housewares&&

Product Description
Supplier	HANWHA
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,High liquidity,Food contact compliance,Impact copolymer
Availabilitys	North America,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	43	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	39	J/m	ASTM D256
0℃	49	J/m	ASTM D256
23℃	69	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	110	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	85		ASTM D785
tensile strength
yield	28.4	MPa	ASTM D638
Tensile strain
fracture	50	%	ASTM D638
Bending modulus	1570	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.