KIBITON® TPE PB-575

About
KIBITON® TPE PB-575 is a Thermoplastic Elastomer (TPE) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: rohs compliant.&&

Product Description
Supplier	CHI MEI
Generic	TPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.938	g/cm³	ASTM D792
Melt Flow Rate			ASTM D1238
190℃，5.0kg	4.5	g/10min	ASTM D1238
200℃，5.0kg	7.0	g/10min	ASTM D1238
Ash Content	0.3	%	ASTM D1416
oil content	50	phr	ASTM D1416
Volatiles	0.60	wt%	ASTM D1416

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	65		ASTM D2240

Supplementary information	Nominal value	Unit	Test method
Bale Weight	20000	g
BD/SM Ratio	58/42	wt%	ASTM D1416

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	60 to 70	°C
Drying time	1.0 to 2.0	hr
Barrel rear temperature	130 to 150	°C
Barrel middle temperature	150 to 190	°C
Barrel front temperature	150 to 190	°C
Processing (melt) temperature	160 to 170	°C
Mold temperature	30 to 70	°C
Injection pressure	1.96 to 7.85	MPa
Hold pressure	1.96 to 3.92	MPa
Back pressure	0.490 to 0.981	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.