Cereplast Compostables® 7003

About
Cereplast Compostables® resins are renewable, ecologically sound substitutes for petroleum-based plastic product replacing nearly 100% of the petroleum-based additives used in traditional plastics. Cereplast Compostables® resins are using polymer and additives derived from starch and other renewable resources chemistry. These components are carefully blended together on state-of-the-art compounding equipments. All Cereplast Compostables® resins, including Compostable 7003, are certified as biodegradable and compostable in the United States and Europe, meeting BPI (Biodegradable Products Institute www.bpiworld.com) standards for compostability (ASTM6400D99, ASTM6868) and European Bioplastics Standards (EN13432). Compostable 7003 has been designed to have an excellent balance of strength, toughness and processability. Compostable 7003 can be processed on existing sheet extrusion machines. Please see our processing guide for processing and material drying guidelines. This can be found at www.cereplast.com. Compostable 7003 is recommended for extrusion application like straws, profiles, boards, sheets, pipes, conduits, and more…&&

About

Cereplast Compostables® resins are renewable, ecologically sound substitutes for petroleum-based plastic product replacing nearly 100% of the petroleum-based additives used in traditional plastics. Cereplast Compostables® resins are using polymer and additives derived from starch and other renewable resources chemistry. These components are carefully blended together on state-of-the-art compounding equipments. All Cereplast Compostables® resins, including Compostable 7003, are certified as biodegradable and compostable in the United States and Europe, meeting BPI (Biodegradable Products Institute www.bpiworld.com) standards for compostability (ASTM6400D99, ASTM6868) and European Bioplastics Standards (EN13432). Compostable 7003 has been designed to have an excellent balance of strength, toughness and processability. Compostable 7003 can be processed on existing sheet extrusion machines. Please see our processing guide for processing and material drying guidelines. This can be found at www.cereplast.com. Compostable 7003 is recommended for extrusion application like straws, profiles, boards, sheets, pipes, conduits, and more…&&

Product Description
Generic	PLA
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,Renewable resources,Biodegradable,Compostable
Availabilitys	North America,Europe
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.36	g/cm³	ASTM D792-A
Melt Flow Rate
190℃，2.16kg	4.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	3450	MPa	ASTM D638
tensile strength
fracture	55.2	MPa	ASTM D638
Tensile strain
fracture	7.0	%	ASTM D638
Bending modulus	3100	MPa	ASTM D790
bending strength	89.6	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	33	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	50.0	℃	ASTM D648

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.