| About |
|---|
| Artenius A02 is a copolymer of PET (Polyethylene-Terephthalate), delivered in resin pellets. This resin is in amorphous state. It is easily crystallizable and specially designed for injection processes. This product offers excellent flow characteristics in the mould. Artenius A02 is suitable for applications where mechanical properties, gloss and transparency are needed.&& |
| Product Description | |
|---|---|
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good surface appearance,High liquidity,Food contact compliance,Copolymer,Amorphous |
| Availabilitys | Africa & Middle East ,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.76 | g/cm³ | |
| Viscosity value | |||
| Reduced viscosity | 57.0 to 63.0 | ml/g | ISO 1628 |
| Color b | < 1.00 | ASTM D6290 | |
| Color L | > 58.0 | ASTM D6290 | |
| Weight（of 20 Chips） | 320.0 | mg | |
| humidity | < 0.30 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 245 to 255 | ℃ |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 270 to 290 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |