CONTINUUM™ DMDD-6620 HEALTH+™

About
CONTINUUM™ DMDD-6620 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited to packaged health care and pharmaceutical products. High stiffness for superior top-load performance Excellent environmental stress crack resistance Good extrusion characteristics Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.1a EU, No 10/2011 U.S. FDA-DMF Canadian HPFB No Objection USP Class VI Consult the regulations for complete details. Additive Antiblock:No Slip: No Processing Aid: Yes&&

About

CONTINUUM™ DMDD-6620 HEALTH+™ Bimodal High Density Polyethylene Resin is produced by UNIPOL™ II process technology. This resin is a high stiffness resin with superior top-load performance in conjunction with excellent environmental stress crack resistance. DMDD-6620 NT 7 is specifically designed for use in extrusion blow molding equipment, producing containers up to 20 gallons in size, which require superior top-load combined with excellent environmental stress crack resistance. This reason offers excellent processability with low plate out properties. This product is especially well suited to packaged health care and pharmaceutical products. High stiffness for superior top-load performance Excellent environmental stress crack resistance Good extrusion characteristics Complies with: U.S. FDA 21 CFR 177.1520 (c) 3.1a EU, No 10/2011 U.S. FDA-DMF Canadian HPFB No Objection USP Class VI Consult the regulations for complete details. Additive Antiblock:No Slip: No Processing Aid: Yes&&

Product Description
Supplier	DOW
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.958	g/cm³	ASTM D792
Melt Flow Rate			ASTM D1238
190℃，2.16kg	0.28	g/10min	ASTM D1238
190℃，21.6kg	27	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)			ASTM D1693
50 ℃, 10% non-ionic surfactant, F50	220	hr	ASTM D1693
50 ℃, 100% non-ionic surfactant, F50	> 1100	hr	ASTM D1693

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-60.0	℃	ASTM D746
Vicat Softening Temp	131	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	59		ASTM D2240
tensile strength			ASTM D638
yield	24.8	MPa	ASTM D638
fracture	29.0	MPa	ASTM D638
Tensile strain			ASTM D638
yield	3.7	%	ASTM D638
fracture	800	%	ASTM D638
Bending modulus
2% secant	1170	MPa	ASTM D790-B

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.