Stamylex™ 09-258

About
Stamylex 09-258 is a butene based linear low density polyethylene produced in a solution polymerisation process using a Ziegler-Natta catalyst. CAS-No.: 25087-34-7 Applications Stamylex 09-258 is designed for: The manufacturing of articles with extremely long flow paths and stringent warp requirements. Household applications Special Features Stamylex 09-258 is optimised to deliver: Good processing properties and toughness Resistance to cold brittleness Good resistance to an aggressive cleaning environment and high temperatures Excellent environmental stress crack resistance&&

About

Stamylex 09-258 is a butene based linear low density polyethylene produced in a solution polymerisation process using a Ziegler-Natta catalyst. CAS-No.: 25087-34-7 Applications Stamylex 09-258 is designed for: The manufacturing of articles with extremely long flow paths and stringent warp requirements. Household applications Special Features Stamylex 09-258 is optimised to deliver: Good processing properties and toughness Resistance to cold brittleness Good resistance to an aggressive cleaning environment and high temperatures Excellent environmental stress crack resistance&&

Product Description
Supplier	Borealis AG
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Low warping,Excellent Processability,Good flexibility,High Heat Resistance,Butylene copolymer,High ESCR
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.918	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	24	g/10min	ISO 1133

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, molded	43	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	82.0	℃	ISO 306/A
Melting temperature	115	℃	ISO 11357-3

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	51		ISO 868
tensile strength
2 mm, molded into shape	7.00	MPa	ISO 527-2/1BA/500
Tensile strain
Fracture, 2 mm, molded	200	%	ISO 527-2/1BA/500

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.