Ecomass® 706BI76

About
Ecomass® Compound 706BI76. Nontoxic alternative to traditional materials. Features: Moderate Specific Gravity, Filled ABS, Plating Grade.&&

Product Description
Generic	ABS
Material Status	Commercial: Active
Features	Electroplating,HB
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.49	g/cm³	ISO 1183
Shrinkage rate
4.0 mm	0.30 to 0.50	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	20.0	MPa	ISO 527-2
Tensile strain
fracture	3.0 to 5.0	%	ISO 527-2
Bending modulus	5470	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	64	kJ/m²	ISO 180-A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	94.0	℃	ISO 75-2/B
1.8 MPa, unannealed	84.0	℃	ISO 75-2/A
Vicat Softening Temp	97.0	℃	ISO 306

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
1.50 mm	HB		UL 94

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	82	°C
Drying time – hot air dryer	2.0	hr
Drying time, maximum	6.0	hr
Processing (melt) temperature	204 to 246	°C
Mold temperature	66 to 82	°C
Injection pressure	68.9 to 103	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.