| About |
|---|
| DAI-EL® G-7300EBP is a bisphenol curable, gum copolymer. It has excellent mold flow compared with copolymers of similar Mooney viscosity, which makes it well suited for compression, transfer or injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Daikin Fluorochemicals |
| Generic | 氟橡胶 |
| Material Status | Commercial: Active |
| Features | High liquidity,Copolymer |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.81 | g/cm³ | |
| Mooney viscosity | |||
| ML 1+10，121℃ | 35 | MU | |
| Fluorine content | 66 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 76 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| — | 12.5 | MPa | |
| — | 12.8 | MPa | |
| Tensile strain | |||
| fracture | 220 | % | |
| fracture | 210 | % | |
| Compression deformation | |||
| 200℃，70 hr | 19 | % | |
| 200℃，70 hr | 16 | % | |
| MH | |||
| — | 20.6 | lb·in | |
| — | 105 | lb·in | |
| ML | |||
| — | 1.00 | lb·in | |
| — | 9.10 | lb·in | |
| t’50 -（time to 50% cure） | |||
| — | 1.3 | min | |
| — | 2.7 | min | |
| t’90（time to 90% cure） | |||
| — | 1.6 | min | |
| — | 3.0 | min | |
| Ts2 (coking time) | |||
| — | 1.1 | min | |
| — | 1.7 | min |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Curing time – Press Cure | |||
| 177℃ | 10.0 | min | |
| 177℃ | 5.0 | min | |
| 100 | Hz | ||
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -18.0 | ℃ | ASTM D1329 |
| Post curing time | |||
| 232℃ | 24 | hr | |
| 260℃ | 24 | hr |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. ODR |
| 3. MDR 2000 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |