Multi-Flex® TPE A7204 LC

About
Multi-Flex® TPE A7204 LC is a Thermoplastic Elastomer (TPE) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.&&

Product Description
Generic	TPE
Material Status	Commercial: Active
Features	Good Dimensional Stability
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.07	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	0.70	g/10min	ASTM D1238

elastic body	Nominal value	Unit	Test method
tensile strength
fracture	11.0	MPa	ASTM D412
Tensile strain
fracture	600	%	ASTM D412
tear strength	35.0	kN/m	ASTM D624
Compression deformation			ASTM D395
23℃，22 hr	13	%	ASTM D395
70℃，22 hr	33	%	ASTM D395
100℃，22 hr	55	%	ASTM D395

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore A, 10 seconds	69		ASTM D2240

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Drying temperature	66	°C
Drying time	2.0 to 4.0	hr
Barrel rear temperature	191	°C
Barrel middle temperature	196	°C
Barrel front temperature	202	°C
Nozzle temperature	202	°C
Processing (melt) temperature	202	°C
Mold temperature	27 to 43	°C
Injection speed	Moderate-Fast
Barrel 1 zone temperature	160	°C
Barrel 3 zone temperature	188	°C
Barrel 5 zone temperature	210	°C
Melt temperature	204	°C
Nozzle temperature	213	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.