| About |
|---|
| Type: Estane® ZHF90AT2 NAT 022 is a halogen free, flame retardant, aromatic polyether-based thermoplastic polyurethane. Appearance: White opaque spherical pellets Application: Cable & Wire Features: Zero halogen&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | TPU-醚 |
| Material Status | Commercial: Active |
| Features | Aromatic,Halogen free,Flame Characteristics,V-2 |
| Availabilitys | Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ISO 2781 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 527-3/5/200 | ||
| fracture | 28.0 | MPa | ISO 527-3/5/200 |
| 50% strain | 8.00 | MPa | ISO 527-3/5/200 |
| 100% strain | 9.00 | MPa | ISO 527-3/5/200 |
| 300% strain | 13.7 | MPa | ISO 527-3/5/200 |
| Tensile strain | |||
| fracture | 520 | % | ISO 527-3/5/200 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 85 | kN/m | ISO 34-1 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 85.0 | ℃ | ISO 306/A50 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| 3.00 mm | V-2 | UL 94 | |
| Extreme oxygen index | 24 | % | ASTM D2863 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second | 90 | ISO 868 | |
| abrasion resistance | 38.0 | mm³ | ISO 4649-A |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 100 | °C | |
| Drying time | 3.0 | hr | |
| Recommended maximum moisture content | < 0.050 | % | |
| Barrel 1 zone temperature | 200 | °C | |
| Barrel 2 zone temperature | 205 | °C | |
| Barrel 3 zone temperature | 210 | °C | |
| Barrel 4 zone temperature | 205 | °C | |
| Connector temperature | 205 | °C | |
| Nozzle temperature | 205 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method Bb, Angle (Nicked) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |