| About |
|---|
| Lupolen 4261 AG UV 60005 is a high density polyethylene with outstanding ESCR, high impact resistance and good chemical resistance. It is delivered in pellet form and contains antioxidants and a UV-stabiliser. Typical customer applications include IBC for the packaging of dangerous goods and heating oil tanks. Lupolen 4261 AG UV 60005 is not intended for use in medical and pharmaceutical applications.&& |
| Product Description | |
|---|---|
| Supplier | LyondellBasell |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good flexibility,High impact resistance,Inoxidizability,Solvent resistance,High ESCR |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.945 | g/cm³ | ISO 1183 |
| Apparent density | > 0.50 | g/cm³ | ISO 60 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，21.6kg | 6.0 | g/10min | ISO 1133 |
| 190℃，5.0kg | 0.35 | g/10min | ISO 1133 |
| Full incision creep test | |||
| 3.5 MPa，80℃ | 2.5 | day | ISO 16770 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | |||
| -30℃ | 170 | kJ/m² | ISO 8256/1A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 70.0 | ℃ | ISO 75-2/B |
| 1.8 MPa, unannealed | 42.0 | ℃ | ISO 75-2/A |
| Vicat Softening Temp | |||
| A50 | 125 | ℃ | ISO 306/A50 |
| B50 | 75.0 | ℃ | ISO 306 |
| Melting temperature | |||
| DSC | 130 | ℃ | ISO 3146 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Staudinger index | 370 | cm³/g | ISO 1628 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Ball hardness | |||
| H 132/30 | 40.0 | MPa | ISO 2039-1 |
| Tensile modulus | |||
| 23℃ | 850 | MPa | ISO 527-2 |
| tensile strength | |||
| Yield, 23 ℃ | 24.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| yield | 10 | % | ISO 527-2 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 180 to 220 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 2% Arkopal N100 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |