| About |
|---|
| Flexalloy® 9100-75 is a Polyvinyl Chloride Elastomer (PVC Elastomer) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding. Important attributes of Flexalloy® 9100-75 are: Eco-Friendly/Green Heat Resistant High Molecular Weight Weather Resistant Typical applications include: Hose/Tubing Consumer Goods Containers Engineering/Industrial Parts Film&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | PVC elastomer |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Renewable resources,Ultra high molecular weight,Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 1.0 to 2.5 | % | ASTM D955 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 36.8 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395 | ||
| 23℃，22 hr | 26 | % | ASTM D395 |
| 70℃，22 hr | 55 | % | ASTM D395 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | 80.0 | ℃ | ASTM D794 |
| Embrittlement temperature | -48.0 | ℃ | ASTM D746 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 75 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| fracture | 18.6 | MPa | ASTM D638 |
| 100% strain | 8.27 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 400 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel rear temperature | 182 to 199 | °C | |
| Barrel middle temperature | 182 to 199 | °C | |
| Barrel front temperature | 182 to 199 | °C | |
| Mold temperature | 24 to 52 | °C | |
| Back pressure | 0.345 to 1.03 | MPa | |
| Screw length to diameter ratio | 20.0 : 1.0 to 24.0 : 1.0 | ||
| Screw compression ratio | 2.0 : 1.0 to 3.0 : 1.0 | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |