ALTECH® PA6 ECO 3230/100 GB20 GF10

About
ALTECH® PA6 ECO 3230/100 GB20 GF10 is a Polyamide 6 (Nylon 6) product filled with 20% glass bead and 10% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Characteristics include: RoHS Compliant Fast Molding Cycle Heat Resistant Warp Resistant&&

Product Description
Supplier	ALBIS
Generic	PA6
Material Status	Commercial: Active
Features	Low warping,Good heat aging resistance,Quick molding cycle
Availabilitys	North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.35	g/cm³
Water absorption rate
Equilibrium, 23 ℃, 50% RH	6.5	%

MECHANICAL	Nominal value	Unit
Tensile modulus	5800	MPa
tensile strength
fracture	95.0	MPa
Tensile strain
fracture	3.0	%
Bending modulus	—	MPa
bending strength	150	MPa

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	4.0	kJ/m²
Charpy Unnotch Impact strength	50	kJ/m²

THERMAL	Nominal value	Unit
Hot deformation temperature
1.8 MPa, unannealed	190	℃
Vicat Softening Temp	205	℃
Melting temperature
DSC	220	℃

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature – hot air dryer	80	°C
Drying time – hot air dryer	2.0 to 12	hr
Recommended maximum moisture content	0.15	%
Processing (melt) temperature	270 to 290	°C
Mold temperature	80 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.