| About |
|---|
| Riteflex® 435 is a Thermoplastic Polyester Elastomer with a 35 nominal Shore D hardness, low modulus and outstanding low temperature impact strength and tear resistance.&& |
| Product Description | |
|---|---|
| Supplier | Celanese |
| Generic | TPC-ET |
| Material Status | Commercial: Active |
| Features | Good tear strength,low-temperature impact resistance,HB |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 220℃，2.16kg | 9.0 | g/10min | ISO 1133 |
| Shrinkage rate | ISO 294-4 | ||
| TD | 1.0 | % | ISO 294-4 |
| MD | 1.3 | % | ISO 294-4 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ISO 868 | ||
| Shore A, 15 seconds | 91 | ISO 868 | |
| Shore D, 15 seconds | 35 | ISO 868 | |
| Tensile modulus | 45.0 | MPa | ISO 527-2/1A/1 |
| tensile strength | |||
| fracture | 16.0 | MPa | ISO 527-2/1A/50 |
| 5% strain | 2.00 | MPa | ISO 527-2 |
| 10% strain | 3.00 | MPa | ISO 527-2 |
| 50% strain | 6.00 | MPa | ISO 527-2/1A/50 |
| Tensile strain | |||
| fracture | 650 | % | ISO 527-2/1A/50 |
| Bending modulus | ISO 178 | ||
| -40℃ | 240 | MPa | ISO 178 |
| 23℃ | 35.0 | MPa | ISO 178 |
| 100℃ | 19.0 | MPa | ISO 178 |
| bending strength | ISO 178 | ||
| 3.50% strain | 1.00 | MPa | ISO 178 |
| 23℃ | 3.00 | MPa | ISO 178 |
| Ross Twist Test | > 1.0E+6 | Cycles | Internal Method |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | ISO 34-1 | ||
| TD | 89 | kN/m | ISO 34-1 |
| MD | 89 | kN/m | ISO 34-1 |
| Basho’s elasticity | |||
| — | 60 | % | Internal Method |
| — | 65 | % | ASTM D2632 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | No Break | ISO 179/1eA | |
| 23℃ | No Break | ISO 179/1eA | |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | No Break | ISO 179/1eU | |
| 23℃ | No Break | ISO 179/1eU | |
| Impact strength of cantilever beam notch | ISO 180/1A | ||
| -40℃ | No Break | ISO 180/1A | |
| -30℃ | No Break | ISO 180/1A | |
| 23℃ | No Break | ISO 180/1A | |
| Notched impact strength of cantilever beam | ISO 180/1U | ||
| -30℃ | No Break | ISO 180/1U | |
| 23℃ | No Break | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 45.0 | ℃ | ISO 75-2/B |
| Melting temperature | 185 | ℃ | ISO 11357-3 |
| Linear coefficient of thermal expansion | |||
| MD | 2.4E-4 | 1/℃ | ISO 11359-2 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 2.0E+15 | ohms | IEC 60093 |
| Volume resistivity | 2.0E+13 | ohms·cm | IEC 60093 |
| Dielectric strength | 25 | kV/mm | IEC 60243-1 |
| Relative permittivity | |||
| 1 MHz | 5.10 | IEC 60250 | |
| Compared to the leakage tracing index | > 600 | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | HB | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 100 to 110 | °C | |
| Drying time | 4.0 | hr | |
| Recommended maximum moisture content | 0.050 | % | |
| Proposed maximum recycled material ratio | 25 | % | |
| Hopper temperature | 20 to 50 | °C | |
| Barrel rear temperature | 185 to 200 | °C | |
| Barrel middle temperature | 185 to 200 | °C | |
| Barrel front temperature | 185 to 210 | °C | |
| Nozzle temperature | 200 to 215 | °C | |
| Processing (melt) temperature | 200 to 215 | °C | |
| Mold temperature | 20 to 55 | °C | |
| Injection speed | Moderate-Fast | ||
| Back pressure | 0.00 to 0.345 | MPa | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |