| About |
|---|
| 增强级。本产品通过玻璃纤维增强，极大的提高了材料的力学强度、耐热性、尺寸稳定性、抗儒变性。本产品为33%玻纤增强、尺寸稳定、力学性能优良。主要用于园林机械等。 |
| Product Description | |
|---|---|
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Heat Resistance, Good |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.2 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 23℃，50% RH | 1.25 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 90 | MPa | ISO 527 |
| Tensile strain | 7.5 | % | ISO 527 |
| Bending modulus | 3500 | MPa | ISO 178 |
| bending strength | 120 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of simply supported beam (23 ° C) | |||
| Gap | 8 | kJ/m² | ISO 179 |
| No gap | 50 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 210 | ℃ | ISO 75 |
| Melting temperature | 225~255 | ℃ | ISO 11357 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 1013 | ohms·cm | GB/T1410 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |