TOTAL Polyethylene Lumicene® M 3410 EP (EU - Blow Molding)

About
Lumicene® mPE M3410 EP is a metallocene-based medium density polyethylene (MDPE) combining the features of conventional blow molding polyethylene with differentiated optical properties such as gloss and contact clarity. In combination with HDPE BM593 (physical blend), Lumicene mPE M3410 EP combines all the current requirements for the manufacture of blow molded packaging in the cosmetics and household liquids markets. Lumicene® mPE M3410 EP is a pellet grade and contains antioxidants.&&

About

Lumicene® mPE M3410 EP is a metallocene-based medium density polyethylene (MDPE) combining the features of conventional blow molding polyethylene with differentiated optical properties such as gloss and contact clarity. In combination with HDPE BM593 (physical blend), Lumicene mPE M3410 EP combines all the current requirements for the manufacture of blow molded packaging in the cosmetics and household liquids markets. Lumicene® mPE M3410 EP is a pellet grade and contains antioxidants.&&

Product Description
Supplier	TOTAL
Generic	mMDPE
Material Status	Commercial: Negative
Features	Good Clarity,Inoxidizability
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.934	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	0.90	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)
100% emulsifier, F50	> 1000	hr	ASTM D1693B

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength
23℃	80	kJ/m²	ISO 179

Supplementary information	Nominal value	Unit	Test method
Blowing molding temperature	160 to 200	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.