Etinox® 630P - SOLIAO

About
The resin ETINOX 630-P is a vinyl chloride homopolymer obtained by suspension polymerization. CHARACTERISTICS: The resin ETINOX 630-P is a resin of medium molecular weight that has been selected to obtain good mechanical properties maintaining correct fusion behaviour and an excellent fluidity when fused. Due to its high bulk density, the resin ETINOX 630-P leads to a very high level of productivity when processed. The resin ETINOX 630-P has good thermal stability and initial color. RECOMMENDED APPLICATIONS: ETINOX 630-P has been especially designed for the manufacture of rigid products and outdoor uses, in particular for: Extruded profiles Pipes for electric cables&&

About

The resin ETINOX 630-P is a vinyl chloride homopolymer obtained by suspension polymerization. CHARACTERISTICS: The resin ETINOX 630-P is a resin of medium molecular weight that has been selected to obtain good mechanical properties maintaining correct fusion behaviour and an excellent fluidity when fused. Due to its high bulk density, the resin ETINOX 630-P leads to a very high level of productivity when processed. The resin ETINOX 630-P has good thermal stability and initial color. RECOMMENDED APPLICATIONS: ETINOX 630-P has been especially designed for the manufacture of rigid products and outdoor uses, in particular for: Extruded profiles Pipes for electric cables&&

Product Description
Generic	PVC homopolymer
Material Status	Commercial: Active
Features	Good Rigidity,Good liquidity,Heat Stabilized,Homopolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Profile extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.57	g/cm³	ISO 60
K (wear) coefficient	64.0		ISO 1628-2
Specific Viscosity	0.393		ISO 1628-2
Particle size			ISO 4610
<0.063 µm	2.00	%	ISO 4610
>0.250 µm	2.00	%	ISO 4610

Supplementary information	Nominal value	Unit	Test method
volatility	0.20	%	ISO 1269

Notes
1. Typical properties: these are not to be construed as specifications.
2. 0.4 gr of resin in 100 cc of cyclohexanone at 25°C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.