EUROPLEX® Sheet PPSU 99470 Transparent

About
EUROPLEX® PPSU is a flame-retardant sheet material based on polyphenylsulfone (PPSU). It shows excellent mechanical properties as well as good chemical resistance. The sheet series meets the fire standard requirements for many applications in public transport including the OSU 65/65 heat release requirements for large interior parts in passenger aircraft. EUROPLEX ® PPSU sheets are available in transparent and opaquely colors. EUROPLEX® PPSU 99470/99472 transparent low color tinted EUROPLEX® PPSU 99470/99472 is a low color tinted, transparent sheet grade of PPSU, which was developed specifically for aircraft interior applications. The sheet offers low heat release, low smoke generation, and low toxic gas emissions, thereby complying with the FAA/JAA regulation 14CFR Part 25.853 Appendix F. The sheet is available in different transparent (grey/brown/blue tinted) colors. Custom color matching can also provided. EUROPLEX® PPSU 99470/99472 is ideally suited for a wide range of applications such as galley doors, stair case windows, shower doors, bar racks, cabin dividers, picture covers, large safety windows, etc.&&

About

EUROPLEX® PPSU is a flame-retardant sheet material based on polyphenylsulfone (PPSU). It shows excellent mechanical properties as well as good chemical resistance. The sheet series meets the fire standard requirements for many applications in public transport including the OSU 65/65 heat release requirements for large interior parts in passenger aircraft. EUROPLEX ® PPSU sheets are available in transparent and opaquely colors. EUROPLEX® PPSU 99470/99472 transparent low color tinted EUROPLEX® PPSU 99470/99472 is a low color tinted, transparent sheet grade of PPSU, which was developed specifically for aircraft interior applications. The sheet offers low heat release, low smoke generation, and low toxic gas emissions, thereby complying with the FAA/JAA regulation 14CFR Part 25.853 Appendix F. The sheet is available in different transparent (grey/brown/blue tinted) colors. Custom color matching can also provided. EUROPLEX® PPSU 99470/99472 is ideally suited for a wide range of applications such as galley doors, stair case windows, shower doors, bar racks, cabin dividers, picture covers, large safety windows, etc.&&

Product Description
Supplier	Evonik
Generic	PPSU
Material Status	Commercial: Active
Features	Low smoke,Flame Characteristics,Solvent resistance,V-0
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.29	g/cm³	ISO 1183

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2300	MPa	ISO 527-2
tensile strength	70.0	MPa	ISO 527-2
Tensile strain
fracture	60 to 80	%	ISO 527-2

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	无断裂		ISO 179

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	223	℃	ISO 306
Maximum operating temperature	195	℃

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

optical performance	Nominal value	Unit	Test method
Transmittance
4000 µm	45.0	%	ISO 13468-1

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.