Perlast® G75M

About
Perlast® G75M is a black, multi-purpose, perfluoroelastomer compound that provides ultimate all-round resistance to a broad range of chemicals. Perlast® G75M offers an extremely low compression set, with modulus and hardness optimized to suit the majority of sealing applications. Perlast® G75M is ideally suited for use in mechanical seals and multi- substance chemical plants. Perlast® G75M can be moulded into O-rings (any size up to 2m/6.5ft diameter) and custom shapes. Key Attributes Extremely low compression set Superior long-term sealing efficiency Broad chemical resistance High mechanical strength Typical Applications Pumps Valves Mechanical seals Chemical process and refining industries Couplings & fittings&&

About

Perlast® G75M is a black, multi-purpose, perfluoroelastomer compound that provides ultimate all-round resistance to a broad range of chemicals. Perlast® G75M offers an extremely low compression set, with modulus and hardness optimized to suit the majority of sealing applications. Perlast® G75M is ideally suited for use in mechanical seals and multi- substance chemical plants. Perlast® G75M can be moulded into O-rings (any size up to 2m/6.5ft diameter) and custom shapes. Key Attributes Extremely low compression set Superior long-term sealing efficiency Broad chemical resistance High mechanical strength Typical Applications Pumps Valves Mechanical seals Chemical process and refining industries Couplings & fittings&&

Product Description
Generic	PFE
Material Status	Commercial: Active
Features	Good Rigidity,Good Dimensional Stability,Solvent resistance
Availabilitys	North America,Asia Pacific,Europe

Technical Data
MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	75		ASTM D2240
IRHD hardness	72		ASTM D1415 , ISO 48

elastic body	Nominal value	Unit	Test method
tensile strength
yield	18.0	MPa	ASTM D412 , ISO 37
100% strain	9.00	MPa	ASTM D412 , ISO 37
Tensile strain
fracture	150	%	ASTM D412，ISO 37
Compression deformation
200℃，72 hr	20	%	ASTM D395，ISO 815

THERMAL	Nominal value	Unit	Test method
Maximum operating temperature	260	℃
Linear coefficient of thermal expansion	4.30E-4

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.