| About |
|---|
| Skyrol® SH82 is an optically very clear, glossy polyester film. SH82 is both side pretreated for adhesion promotion. SH82 was developed for use as substrate for printing labels, color proofing, masking, overhead projection transparencies, engineering drawing, drafting, etc. and is available in thicknesses from 200 to 1000 gauge.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Optical performance,Good bond |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D1505 |
| Shrinkage rate | Internal Method | ||
| MD：150℃，0.05 mm，30 min | 1.2 | % | Internal Method |
| MD：150℃，0.1 mm，30 min | 1.0 | % | Internal Method |
| TD：150℃，0.05 mm，30 min | 0.50 | % | Internal Method |
| TD：150℃，0.1 mm，30 min | 0.50 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | ASTM D1894 | ||
| With oneself – dynamic | 0.40 | ASTM D1894 | |
| With oneself – dynamic | 0.40 | ASTM D1894 | |
| With oneself – static | 0.50 | ASTM D1894 | |
| With oneself – static | 0.50 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D882 | ||
| MD, yield, 50 µ m | 207 | MPa | ASTM D882 |
| MD, yield, 100 µ m | 193 | MPa | ASTM D882 |
| TD, yield, 50 µ m | 228 | MPa | ASTM D882 |
| TD, yield, 100 µ m | 214 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 50 µ m | 160 | % | ASTM D882 |
| MD, fracture, 100 µ m | 180 | % | ASTM D882 |
| TD, fracture, 50 µ m | 130 | % | ASTM D882 |
| TD, fracture, 100 µ m | 120 | % | ASTM D882 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | ASTM D523 | ||
| 50 µm | 187 | ASTM D523 | |
| 100 µm | 188 | ASTM D523 | |
| Transmittance | ASTM D1003 | ||
| 50.0 µm | 90.0 | % | ASTM D1003 |
| 100 µm | 90.0 | % | ASTM D1003 |
| Haze | ASTM D1003 | ||
| 50 µm | 0.90 | % | ASTM D1003 |
| 100 µm | 1.2 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 100 µm |
| 3. 50 µm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |