| About |
|---|
| Silicone Rubber, RTV-2 Mold Making, Automotive & Transportation Mold Making, Construction Mold Making, Plastics and Rubber Processing Mold Making, Composites Mold Making, Mold Making&& |
| Product Description | |
|---|---|
| Supplier | Wacker |
| Generic | 硅酮 |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| Uncured Properties | Nominal value | Unit | Test method |
| colour | White | ||
| Density | |||
| — | 1.23 | g/cm³ | ISO 2781 |
| — | 1.25 | g/cm³ | DIN 53479 |
| viscosity | |||
| — | 20 | Pa·s | ISO 3219 |
| — | 25 | Pa·s | DIN EN ISO 3219 |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 37 | ISO 868 | |
| tensile strength | 2.50 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 220 | % | ISO 37 |
| tear strength | 4.50 | kN/m | ASTM D624-B |
| Linear Shrinkage | 0.40 | % |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |