Pebax® Rnew 30R51 SA 01

About
Polyether block Pebax® Rnew® 30R51 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. The percentage of renewable carbon according to ASTM D 6866 is 41%. Pebax® Rnew® 30R51 SA 01 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. This grade is particularly recommended for PMMA matrices. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.&&

About

Polyether block Pebax® Rnew® 30R51 SA 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. The percentage of renewable carbon according to ASTM D 6866 is 41%. Pebax® Rnew® 30R51 SA 01 resin is an inherently dissipative polymer and can be dry blended or compounded with a polymer matrix to lower the surface resistivity of the final part. This grade is particularly recommended for PMMA matrices. This hydrophilic grade when extruded into either a thin film or laminated on to a substrate offers excellent permeability to moisture vapor while remaining waterproof.&&

Product Description
Supplier	Arkema
Generic	PA12弹性体
Material Status	Commercial: Negative
Features	Renewable resources,Moisture Permeability,Hydrophilic
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.01	g/cm³	ISO 1183
Water absorption rate			ISO 62
Saturation, 23 ℃	20	%	ISO 62
Equilibrium, 23 ℃, 50% RH	2.5	%	ISO 62

THERMAL	Nominal value	Unit	Test method
Melting temperature	150	℃	ISO 11357-3

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 15 seconds	30		ISO 868
Tensile modulus	—	MPa	ISO 527-2
tensile strength
50% strain	—	MPa	ISO 527-2
Tensile strain
fracture	—	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
2. 10°C/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.