About |
---|
Oil-extended styrene butadiene synthetic rubber SBR-1712 HI-AR is essentially a styrene (23.5%) and butadiene (76.5%) copolymer obtained by emulsification method with the use of resin/fatty soaps. The copolymer is filled with oil HI-AR. Appearance – bale of dark-brown color; weight of a bale – (30 ± 1) kg; packing – a plastic container; shelf life – one (1) year since the date of manufacture&& |
Product Description | |
---|---|
Supplier | SIBUR |
Generic | SBR-乳液聚合 |
Material Status | Commercial: Active |
Features | Inoxidizability,Copolymer |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Mooney viscosity | |||
ML 1+4,100℃ | 46 to 52 | MU | ASTM D1646 |
Combined with styrene | 22.5 to 24.5 | % | Internal Method |
oil content | |||
HIAR | 26 to 29 | % | ASTM D5774 |
Organic Acid | 4.2 to 5.8 | % | ASTM D5774 |
Soap(Organic Acid) | < 0.30 | % | ASTM D5774 |
Solvent Extract Content | 29 to 35 | % | Internal Method |
Ash Content | < 0.60 | % | ASTM D5667 |
Volatiles | < 0.60 | % | ASTM D5668 |
elastic body | Nominal value | Unit | Test method |
---|---|---|---|
tensile strength | |||
yield | > 18.0 | MPa | ASTM D3185 |
300% strain | > 9.80 | MPa | ASTM D3185 |
Tensile strain | |||
fracture | > 380 | % | ASTM D3185 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |